Airframes Reference

This list is auto-generated from the source code.

The AUX channels are only available on Pixhawk Boards (labeled with AUX OUT).

This page lists all supported airframes and types including the motor assignment and numbering. The motors in green rotate clockwise, the ones in blue conterclockwise.

Coaxial Helicopter

Common Outputs
MAIN1: Left swashplate servomotor, pitch axis MAIN2: Right swashplate servomotor, roll axis MAIN3: Upper rotor (CCW) MAIN4: Lower rotor (CW)

Name

Esky (Big) Lama v4

Name
Esky (Big) Lama v4	Maintainer: Emmanuel Roussel `SYS_AUTOSTART` = 15001

Maintainer: Emmanuel Roussel

SYS_AUTOSTART = 15001

Flying Wing

Common Outputs
MAIN1: left aileron MAIN2: right aileron MAIN4: throttle AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name
Phantom FPV Flying Wing	Maintainer: Simon Wilks `SYS_AUTOSTART` = 3031
Sparkle Tech Pigeon	Maintainer: Simon Wilks `SYS_AUTOSTART` = 3036
TBS Caipirinha	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 3100
FX-79 Buffalo Flying Wing	Maintainer: Simon Wilks `SYS_AUTOSTART` = 3034
Wing Wing (aka Z-84) Flying Wing	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 3033
Skywalker X5 Flying Wing	Maintainer: Thomas Gubler , Julian Oes `SYS_AUTOSTART` = 3032
Viper	Maintainer: Simon Wilks `SYS_AUTOSTART` = 3035
IO Camflyer	Maintainer: Simon Wilks `SYS_AUTOSTART` = 3030

Helicopter

Common Outputs
MAIN1: main motor MAIN2: front swashplate servo MAIN3: right swashplate servo MAIN4: left swashplate servo MAIN5: tail-rotor servo

Name

Blade 130X

Name
Blade 130X	Maintainer: Bart Slinger `SYS_AUTOSTART` = 16001

Maintainer: Bart Slinger

SYS_AUTOSTART = 16001

Hexarotor +

Common Outputs
MAIN1: motor1 MAIN2: motor2 MAIN3: motor3 MAIN4: motor4 MAIN5: motor5 MAIN6: motor6 AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name

Generic Hexarotor + geometry

Name
Generic Hexarotor + geometry	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 7001

Maintainer: Anton Babushkin

SYS_AUTOSTART = 7001

Hexarotor Coaxial

Common Outputs
MAIN1: front right top, CW; angle:60; direction:CW MAIN2: front right bottom, CCW; angle:60; direction:CCW MAIN3: back top, CW; angle:180; direction:CW MAIN4: back bottom, CCW; angle:180; direction:CCW MAIN5: front left top, CW; angle:-60; direction:CW MAIN6: front left bottom, CCW;angle:-60; direction:CCW AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Common Outputs

MAIN1: front right top, CW; angle:60; direction:CW
MAIN2: front right bottom, CCW; angle:60; direction:CCW
MAIN3: back top, CW; angle:180; direction:CW
MAIN4: back bottom, CCW; angle:180; direction:CCW
MAIN5: front left top, CW; angle:-60; direction:CW
MAIN6: front left bottom, CCW;angle:-60; direction:CCW
AUX1: feed-through of RC AUX1 channel
AUX2: feed-through of RC AUX2 channel
AUX3: feed-through of RC AUX3 channel

Name

Generic Hexa coaxial geometry

Name
Generic Hexa coaxial geometry	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 11001

Maintainer: Lorenz Meier

SYS_AUTOSTART = 11001

Hexarotor x

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: motor 5 MAIN6: motor 6 AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name

Generic Hexarotor x geometry

Name
Generic Hexarotor x geometry	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 6001

Maintainer: Anton Babushkin

SYS_AUTOSTART = 6001

Octo Coax Wide

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: motor 5 MAIN6: motor 6 MAIN7: motor 7 MAIN8: motor 8

Name

Steadidrone MAVRIK

Name
Steadidrone MAVRIK	Maintainer: Simon Wilks `SYS_AUTOSTART` = 12002

Maintainer: Simon Wilks

SYS_AUTOSTART = 12002

Octorotor +

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: motor 5 MAIN6: motor 6 MAIN7: motor 7 MAIN8: motor 8 AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name

Generic Octocopter + geometry

Name
Generic Octocopter + geometry	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 9001

Maintainer: Anton Babushkin

SYS_AUTOSTART = 9001

Octorotor Coaxial

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: motor 5 MAIN6: motor 6 MAIN7: motor 7 MAIN8: motor 8

Name

Generic 10" Octo coaxial geometry

Name
Generic 10" Octo coaxial geometry	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 12001

Maintainer: Lorenz Meier

SYS_AUTOSTART = 12001

Octorotor x

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: motor 5 MAIN6: motor 6 MAIN7: motor 7 MAIN8: motor 8 AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name

Generic Octocopter X geometry

Name
Generic Octocopter X geometry	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 8001

Maintainer: Anton Babushkin

SYS_AUTOSTART = 8001

Plane A-Tail

Common Outputs
MAIN1: aileron right MAIN2: aileron left MAIN3: v-tail right MAIN4: v-tail left MAIN5: throttle MAIN6: wheel MAIN7: flaps right MAIN8: flaps left AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name

Applied Aeronautics Albatross

Name
Applied Aeronautics Albatross	Maintainer: Andreas Antener `SYS_AUTOSTART` = 2106

Maintainer: Andreas Antener

SYS_AUTOSTART = 2106

Quadrotor +

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: feed-through of RC AUX1 channel MAIN6: feed-through of RC AUX2 channel AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel AUX4: feed-through of RC FLAPS channel

Name

Generic 10" Quad + geometry

Name
Generic 10" Quad + geometry	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 5001

Maintainer: Anton Babushkin

SYS_AUTOSTART = 5001

Quadrotor Wide

Common Outputs
AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel AUX4: feed-through of RC FLAPS channel

Name
Team Blacksheep Discovery Endurance	Maintainer: Simon Wilks `SYS_AUTOSTART` = 10018 Specific Outputs: MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: feed-through of RC AUX1 channel MAIN6: feed-through of RC AUX2 channel
3DR Iris Quadrotor	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 10016 Specific Outputs: MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4
Team Blacksheep Discovery	Maintainer: Anton Babushkin , Simon Wilks `SYS_AUTOSTART` = 10015 Specific Outputs: MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: feed-through of RC AUX1 channel MAIN6: feed-through of RC AUX2 channel
Steadidrone QU4D	Maintainer: Thomas Gubler `SYS_AUTOSTART` = 10017 Specific Outputs: MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: feed-through of RC AUX1 channel MAIN6: feed-through of RC AUX2 channel

Quadrotor asymmetric

Common Outputs
MAIN1: motor1 (front right: CCW) MAIN2: motor2 (back left: CCW) MAIN3: motor3 (front left: CW) MAIN4: motor4 (back right: CW) MAIN5: feed-through of RC AUX1 channel MAIN6: feed-through of RC AUX2 channel

Name

Spedix S250AQ

Name
Spedix S250AQ	Maintainer: Mark Whitehorn `SYS_AUTOSTART` = 4051

Maintainer: Mark Whitehorn

SYS_AUTOSTART = 4051

Quadrotor x

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 MAIN5: feed-through of RC AUX1 channel MAIN6: feed-through of RC AUX2 channel

Name
Generic Quadrotor X config	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 4001 Specific Outputs: AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel AUX4: feed-through of RC FLAPS channel
Lumenier QAV250	Maintainer: Mark Whitehorn `SYS_AUTOSTART` = 4009
DJI Matrice 100	Maintainer: James Goppert `SYS_AUTOSTART` = 4060
H4 680mm with Z1 Tiny2 Gimbal	Maintainer: Leon Mueller `SYS_AUTOSTART` = 10021
3DR Solo	Maintainer: Andreas Antener `SYS_AUTOSTART` = 4030
Lumenier QAV-R (raceblade) 5" arms	Maintainer: James Goppert `SYS_AUTOSTART` = 4003
DJI Flame Wheel F330	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 4010
3DR DIY Quad	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 10020
Generic Quadrotor X config with mount (e.g. gimbal)	Maintainer: Leon Mueller `SYS_AUTOSTART` = 4002 Specific Outputs: AUX1: Mount pitch AUX2: Mount roll AUX3: Mount yaw AUX4: Mount mode AUX5: Mount retract
Intel Aero RTF	Maintainer: John Doe `SYS_AUTOSTART` = 4070
Crazyflie 2.0	Maintainer: John Doe `SYS_AUTOSTART` = 4900
NanoMind 110 Quad	Maintainer: Henry Zhang `SYS_AUTOSTART` = 4090
F450-sized quadrotor with CAN	Maintainer: Pavel Kirienko `SYS_AUTOSTART` = 4012
Generic 250 Racer	Maintainer: Mark Whitehorn `SYS_AUTOSTART` = 4050
AR.Drone Frame	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 4008
Parrot Bebop Frame	Maintainer: Michael Schaeuble `SYS_AUTOSTART` = 4013
Hobbyking Micro PCB	Maintainer: Thomas Gubler `SYS_AUTOSTART` = 4020
DJI Flame Wheel F450	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 4011
ZMR250 Racer	Maintainer: Anton Matosov `SYS_AUTOSTART` = 4080
Reaper 500 Quad	Maintainer: Blankered `SYS_AUTOSTART` = 4040

Rover

Common Outputs
MAIN1: pass-through of control group 0, channel 0 MAIN2: pass-through of control group 0, channel 1 MAIN3: pass-through of control group 0, channel 2 MAIN4: pass-through of control group 0, channel 3 MAIN5: pass-through of control group 0, channel 4 MAIN6: pass-through of control group 0, channel 5 MAIN7: pass-through of control group 0, channel 6 MAIN8: pass-through of control group 0, channel 7

Common Outputs

MAIN1: pass-through of control group 0, channel 0
MAIN2: pass-through of control group 0, channel 1
MAIN3: pass-through of control group 0, channel 2
MAIN4: pass-through of control group 0, channel 3
MAIN5: pass-through of control group 0, channel 4
MAIN6: pass-through of control group 0, channel 5
MAIN7: pass-through of control group 0, channel 6
MAIN8: pass-through of control group 0, channel 7

Name

Axial Racing AX10

Name
Axial Racing AX10	Maintainer: John Doe `SYS_AUTOSTART` = 50001

Maintainer: John Doe

SYS_AUTOSTART = 50001

Simulation

Common Outputs
MAIN1: aileron MAIN2: elevator MAIN3: rudder MAIN4: throttle

Name

HIL Quadcopter X

Name
HIL Quadcopter X	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 1001
HILStar (XPlane)	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 1000
HIL Quadcopter +	Maintainer: Anton Babushkin `SYS_AUTOSTART` = 1003

Maintainer: Anton Babushkin

SYS_AUTOSTART = 1001

HILStar (XPlane)

Maintainer: Lorenz Meier

SYS_AUTOSTART = 1000

HIL Quadcopter +

Maintainer: Anton Babushkin

SYS_AUTOSTART = 1003

Standard Plane

Common Outputs
AUX1: feed-through of RC AUX1 channel AUX2: feed-through of RC AUX2 channel AUX3: feed-through of RC AUX3 channel

Name
Standard AETR Plane	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 2104 Specific Outputs: MAIN1: aileron MAIN2: elevator MAIN3: throttle MAIN4: rudder MAIN5: flaps
Multiplex Easystar	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 2100 Specific Outputs: MAIN1: aileron MAIN2: elevator MAIN3: rudder MAIN4: throttle
Bormatec Maja	Maintainer: Andreas Antener `SYS_AUTOSTART` = 2105 Specific Outputs: MAIN1: aileron MAIN2: aileron MAIN3: elevator MAIN4: rudder MAIN5: throttle MAIN6: wheel MAIN7: flaps
Skyhunter 1800	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 2103 Specific Outputs: MAIN1: aileron MAIN2: elevator MAIN4: throttle
Skywalker (3DR Aero)	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 2102 Specific Outputs: MAIN1: aileron MAIN2: elevator MAIN3: throttle MAIN4: rudder MAIN5: flaps
Standard AERT Plane	Maintainer: Lorenz Meier `SYS_AUTOSTART` = 2101 Specific Outputs: MAIN1: aileron MAIN2: elevator MAIN3: rudder MAIN4: throttle MAIN5: flaps

Standard VTOL

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4

Name
Sparkle Tech Ranger VTOL	Maintainer: Andreas Antener `SYS_AUTOSTART` = 13009
Generic AAVVT v-tail plane airframe with Quad VTOL.	Maintainer: Sander Smeets `SYS_AUTOSTART` = 13007
DeltaQuad	Maintainer: Sander Smeets `SYS_AUTOSTART` = 13013 Specific Outputs: AUX1: Right elevon AUX2: Left elevon AUX3: Motor
QuadRanger	Maintainer: Sander Smeets `SYS_AUTOSTART` = 13008
Fun Cub Quad VTOL	Maintainer: Simon Wilks `SYS_AUTOSTART` = 13005 Specific Outputs: AUX1: Aileron 1 AUX2: Aileron 2 AUX3: Elevator AUX4: Rudder AUX5: Throttle
Generic quad delta VTOL	Maintainer: Simon Wilks `SYS_AUTOSTART` = 13006 Specific Outputs: AUX1: Right elevon AUX2: Left elevon AUX3: Motor

Tricopter Y+

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: yaw servo

Name

Generic Tricopter Y+ Geometry

Name
Generic Tricopter Y+ Geometry	Maintainer: Trent Lukaczyk `SYS_AUTOSTART` = 14001

Maintainer: Trent Lukaczyk

SYS_AUTOSTART = 14001

Tricopter Y-

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: yaw servo

Name

Generic Tricopter Y- Geometry

Name
Generic Tricopter Y- Geometry	Maintainer: Trent Lukaczyk `SYS_AUTOSTART` = 14002

Maintainer: Trent Lukaczyk

SYS_AUTOSTART = 14002

VTOL Duo Tailsitter

Common Outputs
MAIN1: motor right MAIN2: motor left MAIN5: elevon right MAIN6: elevon left

Name

Caipiroshka Duo Tailsitter

Name
Caipiroshka Duo Tailsitter	Maintainer: Roman Bapst `SYS_AUTOSTART` = 13001

Maintainer: Roman Bapst

SYS_AUTOSTART = 13001

VTOL Quad Tailsitter

Common Outputs
MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 4 MAIN4: motor 5 MAIN5: elevon left MAIN6: elevon right MAIN7: canard surface MAIN8: rudder

Name

Quadrotor + Tailsitter

Name
Quadrotor + Tailsitter	Maintainer: Roman Bapst `SYS_AUTOSTART` = 13004
Quadrotor X Tailsitter	Maintainer: Roman Bapst `SYS_AUTOSTART` = 13003

Maintainer: Roman Bapst

SYS_AUTOSTART = 13004

Quadrotor X Tailsitter

Maintainer: Roman Bapst

SYS_AUTOSTART = 13003

VTOL Tiltrotor

Common Outputs
AUX1: Tilt servo AUX2: Elevon 1 AUX3: Elevon 2 AUX4: Gear

Name

E-flite Convergence

Name
E-flite Convergence	Maintainer: Andreas Antener `SYS_AUTOSTART` = 13012 Specific Outputs: MAIN1: Motor right MAIN2: Motor left MAIN3: Motor back MAIN4: empty MAIN5: Tilt servo right MAIN6: Tilt servo left MAIN7: Elevon right MAIN8: Elevon left
CruiseAder Claire	Maintainer: Samay Siga `SYS_AUTOSTART` = 13010
BirdsEyeView Aerobotics FireFly6	Maintainer: Roman Bapst `SYS_AUTOSTART` = 13002 Specific Outputs: MAIN1: Front right motor bottom MAIN2: Front right motor top MAIN3: Back motor bottom MAIN4: Back motor top MAIN5: Front left motor bottom MAIN6: Front left motor top

Maintainer: Andreas Antener

SYS_AUTOSTART = 13012

Specific Outputs:

MAIN1: Motor right
MAIN2: Motor left
MAIN3: Motor back
MAIN4: empty
MAIN5: Tilt servo right
MAIN6: Tilt servo left
MAIN7: Elevon right
MAIN8: Elevon left

CruiseAder Claire

Maintainer: Samay Siga

SYS_AUTOSTART = 13010

BirdsEyeView Aerobotics FireFly6

Maintainer: Roman Bapst

SYS_AUTOSTART = 13002

Specific Outputs:

MAIN1: Front right motor bottom
MAIN2: Front right motor top
MAIN3: Back motor bottom
MAIN4: Back motor top
MAIN5: Front left motor bottom
MAIN6: Front left motor top

custom

Name

Passthrough mode for Snapdragon

Name
Passthrough mode for Snapdragon	Maintainer: Julian Oes This startup can be used on Pixhawk/Pixfalcon/Pixracer for the passthrough of RC input and PWM output. `SYS_AUTOSTART` = 20000

Maintainer: Julian Oes This startup can be used on Pixhawk/Pixfalcon/Pixracer for the passthrough of RC input and PWM output.

SYS_AUTOSTART = 20000

参考机型

Airframes Reference

Coaxial Helicopter

Flying Wing

Helicopter

Hexarotor +

Hexarotor Coaxial

Hexarotor x

Octo Coax Wide

Octorotor +

Octorotor Coaxial

Octorotor x

Plane A-Tail

Quadrotor +

Quadrotor Wide

Quadrotor asymmetric

Quadrotor x

Rover

Simulation

Standard Plane

Standard VTOL

Tricopter Y+

Tricopter Y-

VTOL Duo Tailsitter

VTOL Quad Tailsitter

VTOL Tiltrotor

custom

results matching ""

No results matching ""